Shenzhen Angel Equipment & Technology Co., Ltd.
Shenzhen Angel Equipment & Technology Co., Ltd.
Add to Cart
Ozone Sterilizer Water Dispenser Sterilization YX-2000 Ozone Output Rate 2000 mg per hour
Instruction
Preparation of the water dispenser: take off the water bottle on the water dispenser, drain the remaining water in the water dispenser, clean the feedwater entrance, then place a clean empty bottle on the water dispenser.
Connect the two silica gel of YX-2000 to the two faucets of water dispenser; turn on the faucets of water dispenser.
Plug into an electric supply to get switched on of the ozone sterilizer, press the startup button, then the ozone generator will be started. Choose the proper time for sterilizing, 10 minutes per month or 20 minutes two months, just for the reference.
After disinfection, turn off the power, and disconnect the silica gel pipes from the faucets, close the ozone generator box, turn off the faucets of water dispenser.
Take off the empty water bottle on the water dispenser, then place bottle of pure water to the water dispenser, open the faucet and use about 300ml water to flush the water pipes. After that, the pure water is drinkable.
Voltage and frequency: 220V/50Hz.
| Model | YX-1000 | YX-2000 |
| Ozone generation rate | 1000mg/h | 2000mg/h |
| Size | 365mm×210mm×230mm | 365mm×210mm×230mm |
| Weight | 4.5kg | 5.5kg |
| Power | 20w | 35w |
